Thứ Hai, 8 tháng 8, 2016

lightweight terracotta pots

lightweight terracotta pots is one of the art and it requires many stages as the stitch selected, soil treatment, soil preparation and shaping, patterned enamelled and finally baked products

The share potter pottery process as follows:

The first step we must choose the ground to make pottery: ceramic raw materials are taken from the clay.

The pottery production centers are far from exploiting local resources.

Stage 2: processing and preparation of land: Land for ceramic materials are mixed with impurities, the requirements of each different type of pottery that could have prepared how to handle different land to create product line accordingly.

Mixing, handling traditional land is handled through system treading water in containers, ceramic 4 pools at different heights as

Pool 1: appear higher than it is rated for immersion tank of crude clay and water, soak for about 3-4 months time.

Clay under the action of the water will break its primitive seed implant and begin the process of decay.

Once the stage nine, against the land of truth were, real soil to soil particles to actually dissolve in water to form a liquid mixture.


Then it moved to the tank support this 2 .dat clay filter that will subside and impurities will emerge, we proceed to remove the fluid chung.roi scoop carry out exposure and incubated them with a part of the chemical.

Phase 3: Shape

With skilled hands of the ceramists and craftsmen create products with your hands on the table .In spinning at shaping, variable-blower style ceramic hand claws, loaches be on turntables.

Land put on the turntable and rotated for very fine, on the diamond and threw to fall short again.
Then they put in that between decks, pat stick then compressed soil and ground very fine scissors for plastic



Stage 4: Exposure and edit

Is dry wood so that it no cracks, does not alter the shape of the product.

Optimization measures that the potter is traditionally used to dry on racks artifacts cool place.
Right now the potters of concern that have applied to raise the temperature drying slowly to let the water slowly evaporates.

Phase 5: drawing and enameling

There are products that can be drawn before and after enamelling and enamelled products before drawing back, with glazed areas with different degrees of technical and drawing each place is different.

Phase 6: terracotta pottery

stage is the most important ceramic firing if not careful will be broken off a batch of ceramic and this stage it depends on fire

THIEN KY EXIM CO., LTD
Head Office:
72/37 Nhat Chi Mai Street, Ward 13, Tan Binh Dist,
Ho Chi Minh City, Vietnam.
Tel: +84-984 339 740 - Fax: +84-8 6281 0764
Showroom address:
A4, Hamlet 4, Bui Huu Nghia Street, Tan Van Ward, Bien Hoa City,
Dong Nai Province, Vietnam.
Factory address:
Hamlet 4, Tan Dinh Village,Ben Cat District,
Binh Duong Province, Vietnam.

Tel: +84-984 339 740

6 nhận xét:

  1. lightweight terracotta pots is one of the art and it requires many stages as the stitch selected, soil treatment, soil preparation and shaping, patterned enamelled and finally baked products

    Trả lờiXóa
  2. Air wings are famous pottery from past to present with skilled artisans and the unique creation for each product.The potter also capture the interest of the market mainly ceramics with various designs and enthusiasm has produced nice top line of ceramic hearts.

    Trả lờiXóa
  3. lightweight terracotta pots is one of the art and it requires many stages as the stitch selected, soil treatment, soil preparation and shaping, patterned enamelled and finally baked products

    The share potter pottery process as follows:

    The first step we must choose the ground to make pottery: ceramic raw materials are taken from the clay.

    Trả lờiXóa
  4. lightweight terracotta pots được sản xuất ở đâu của việt nam đấy

    Trả lờiXóa
  5. Vietnam market with ceramic pots sell it?

    Trả lờiXóa
  6. The share potter pottery process as follows:

    Trả lờiXóa